Doctor Who Coat – Vogue 8346

Doctor Who Coat

The coat I have is roughly 18 years old. I’ve had it since I graduated high school, which means it has lived a long and good life protecting me from the brutal Winters of Northern Virginia and the somewhat-not-so-cold Winters in Texas. It was time for a new coat. I saw these awesome coats by Hot Topic in November. I wanted them, but when I saw them in the store, they felt flimsy and not well-constructed. I decided to make my own with a Victorian flare to it.

Doctor Who Coat

The perfect pattern for this project was Vogue 8346. It’s a fitted coat with a bit of a flare thanks to its circle hem design. Sizing was weird for me. I ended up making a muslin of the pattern per my measurements (36-27-38) which ended up being a Vogue 14. It was surprisingly accurate. Normally with the big-4 commercial patterns I drop down a size due to the copious amount of ease. This time, not so much. That’s ok though, I wanted a good fit, not an ego boost 😉

I streamed the whole construction of the coat from pattern tracing to finishing touches on Twitch (past recordings available here: http://www.twitch.tv/fiercekittenz). The instructions were VERY clear. I was able to put it together without doing much with the instructions. The only regret that I have was not serging the interior seams. I let them go since I thought the lining was stitched to the outer fabric. Not so. This pattern actually wants the lining to hang loose from the coat’s exterior. I had to tack the lining to the interior at the seams to ensure they weren’t exposed.

For the collar, I designed the embroidery patterns in Viking’s 6D software package. The right collar says “The Doctor” and the left says “Tardis.” The velveteen is still somewhat plush, so I made sure to use a water soluble stabilizer on the top to make the embroidery pop.

Additional photos:

Adding Sleeves – AKA: I hate making sleeve patterns

Long Sleeved Shirt

I hate making sleeve patterns.

I spent a good portion of my Thanksgiving break fussing over the sleeve pattern for this shirt, which was based on an earlier, warm weather sleeveless pattern I had made earlier in the year. I tried for a flat cap, but ended up going gathered since it’s the style, and to be honest, screw it. I was spending more time fussing over the sleeves than actually making anything that could be worn. The sleeve cap is ever so slightly gathered, which I do by putting two rows of basting stitches into the cap and gathering them up evenly to fit into the top-most portion of the armhole. The cuffs are hemmed with a 4mm rolled hem foot, but I put elastic channels into the sleeves so that they could be a little puffy and gathered looking at the ends.

The front has a box pleat of roughly 3″ pulled in total in the neckline. That can easily be eliminated, but I think it brings some dynamic to the design. The back is the same, simple keyhole button closure.

The fabric I got on a whim. It was 50% off at Hancock’s Fabrics, so I picked up the amount I needed (roughly 1.5 yards) for under $5. Not bad, if you ask me! My daughter loves it… loves it so much she won’t wear it yet. Figures. I have another stash of fabric to make this out of, and this was the wearable muslin just to make darn sure I didn’t mess any of the measurements up.

I used Twitch.tv to stream the entire construction of the shirt. The recording you can find here, if you’re interested: http://www.twitch.tv/fiercekittenz/v/30182718 I have found that I’m getting a little more used to interacting with viewers while sewing, but it is best for me to work on things that I’m really good at while getting acquainted with streaming first. I’m going with some easier, better known patterns going forward. I’ll be making a Colette Sorbetto out of some lovely fabric from The Cloth Pocket, which looks very much like Gallifreyan in the next week or two!

First Twitch Stream! A Christmas Doll Dress

Doll Dress

So last night I had my first attempt at a Twitch stream. For those who don’t know, Twitch is a streaming service that used to be geared only toward gaming. It has since opened up a new channel called Creative, which allows crafters of all backgrounds and crafting types to share what it is they’re working on. I streamed the sewing of a doll dress as a Christmas gift to my niece, who I hear has asked for an American Girl doll. Let’s hope she gets it! *wink*

Simplicity 1484

Easy Simplicity Pattern

I made the dress using Simplicity Pattern #1484. Normally I would hate on Simplicity. The name is hilariously ironic to me since most of their patterns contain extremely complex instructions and way too many pattern pieces for constructions that should be … well, simple. This one, thankfully, is simple and I’ve made it a few times. It’s quick, easy, and I figured it would be something I could do on my first stream without getting too nervous and forgetting what I was doing.

I don’t normally talk while sewing. Actually, I cuss (more or less) — in particular when I forget a step or stab myself with a needle. That happens often and I had to filter myself last night to avoid putting the “mature audiences” warning on my Twitch feed.

In general, I think things went well. On average I had 6 viewers with a maximum of 10 at one point. I need to figure out how I’m going to stream music and still be able to hear alerts. I have a plan that doesn’t involve me going full bore into Twitch and buying hundreds of dollars of equipment. It’s just me sewing, after all, and I don’t think I’ll be one of those streamers that gets thousands of followers, in particular if I’m sewing doll dresses.

One thing I absolutely want to do going forward is continue to teach. I hope people watching last night appreciated the subtle tips and tricks I was giving as I did each piece of the pattern.

Here’s a close-up shot of the belt details, which is just a silvery ribbon topstitched to the bodice:

Doll Dress Details

Doll Dress Details

Sith Robe for Grandma

Mom's Classroom

Mom’s Classroom

My mother teaches 3rd grade and decided that this year she would decorate her entire classroom with Star Wars items, which is pretty freaking awesome if you ask me. When I got back into sewing, she asked if I could make her a Sith robe to wear to school for December 18th, when The Force Awakens is released (officially anyway). This isn’t a request I take likely. I researched the best methods and techniques used by cosplayers and the 501st to make this robe. It was a huge undertaking, and the construction alone took about 6 hours to complete. This is partly due to my newb-ness at building a Sith/Jedi robe and also because I had to make my own pattern based on a post I found on the Rebel Legion website. It was very helpful toward getting me started, though many of the people posting were considerably taller than us, so some modifications were necessary (putting it lightly, they’re a freaking foot taller than us).

Pattern Making in Progress

Pattern Making in Progress

Since my mother is several states away, we had to use my measurements. My husband was gracious enough to drop Elite Dangerous for a hot second to help measure me. The robe is roomy enough to provide for a varying degree of sizes. I would say this classifies as a “small” or “Disney fairy actor material.” We measured my neck to arm (29″), then neck to feet (51″) to get started. Then I just followed the tutorial from poster EeanLedgor to get the basic shape. The idea is that the sleeve be on the fold and the rest gets cut outright. You need at least a 54″ nap, if not more.

Since most of these robes are meant to be made in wool, that was way out of the price range. We landed on a nice black linen/rayon blend by Kaufmann. I picked it up for $6.48 a yard from Fabric.com during their Black Friday sale. It will drape nicely, but the only issue is that the hood would flop and not have structure (as I noticed in the second attempt by another poster in that tutorial thread). I opted to line the hood with satin, then also apply a layer of interfacing. This gave structure to the hood so it would stand away from the face like you see in the films.

Sewing Tip: Make sure to use charcoal or black interfacing when using darker fabrics, because the interfacing can show through on looser weaves such as a linen! (Don’t ask how I know that, just take it as sage advice)

For pattern-making like this, I tend to use computer paper. I know… *gasp* right? I’m killing trees, but I’m saving my sanity at the same time. See, the thing about taping these pieces of paper together is that it will neatly fold right back up into a single sheet-sized pile. I can then put it into a folder and store it for later, then unfold as-needed without fussing with tissue creases. I also don’t buy into the $15 pattern weights that you can pick up at chain craft stores. Just get some cans of whatever you have sitting in your pantry and put it to good use.

It took me the longest time to cut out the fabric… probably an hour. This was because I was stupid and didn’t factor the hood size into the math for ordering the fabric. Thankfully, I was very precise and had enough to cover this one robe, which was 7 yards, mind you. Five hours after that, I’m sewing in the clothing label and calling it quits. It was a very fun project. I’d do it again, but not too soon after this one as it took an entire Sunday afternoon to complete. The saving grace of the whole thing was using my serger to do the heavy lifting. I sewed the hood with the sewing machine, but the rest was all good sweet serger lovin’.

Lessons Learned:

  • Linen/Rayon blends are lovely and have a fabulous drape. They flow when you walk, like a Sith with a big attitude; however, they also shed a lot, so be prepared to vacuum your sewing machine or serger a LOT. They are also very lightweight. If I hadn’t had lined and interfaced the hood, it would have just sagged horribly.
  • Don’t forget to increase stitch length on the serger when you’re about to go over a chunky area. It didn’t like that very much.
  • A very small 1/4″ hem would have been cleaner for the bottom since the a-line gave a curved edge and there are tucks in my interior hem along the bottom. Fabric’s black so… yeah no one will see it anyway.
  • Get gud at math before buying fabric.

Things I’d Change for Next Time:

  • Don’t use satin as the hood lining. It’ll slip right off your head. I mean, the Sith/Jedi robe isn’t supposed to sit right on your crown anyway. It was always meant to hang over your eyes to disguise you (weird, since the robe totally screams “hey look, Jedi over here!!!” in the films). I went with satin originally so it wouldn’t mess up her hair while at school. Still a good decision on that note, but she’ll have to pull it forward quite a bit to stop it from slipping back.
  • If you’re going to use a lightweight, flowy fabric like the linen blend, make sure that you line with the same fabric as your main and use a lightweight interfacing across the whole thing, otherwise it just won’t sit right when you pull it up. Actually, it’ll just flop and look like something you bought at Party City. I skipped interfacing down the center, because I’m stupid and didn’t buy enough interfacing. So the front-center of the hood flops down while the rest stands away from the face as you’d expect. But really, how often do people who cosplay, much less my mom in a classroom, going to keep that damn hood up 24/7? Probably not often except for pictures. Have you ever been to a con before? It gets hot fast… and nasty smelling.
    • On the note of fabric selections, possibly just using a medium-weight poly/cotton twill like this one at Fabric.com would be better. No need for a lining, though flat-fell seaming would be king here to make your ends look clean (note to self: practice flat fell seaming). The polyester (so evil) will provide a nice drape in addition to being wrinkle-resistant. Mystik Merchant has some lovely fabric guidelines on her site as well, which sort of echo this secondary thought.
  • Decrease the hood height. 27″ was way too high. I think a nice, square 25″ x 25″ like the second, female Jedi cosplayer posted would have been good.
  • Possibly re-draft the hem area so it doesn’t create such a harsh curve when being hemmed — the hem required tucking, not pretty at all and I’m not proud of that part.

Oh you probably want pictures though. Here you go:

Sith Main